"If you use PUR or EVA hot melt adhesives for edge banding, you will recognize and require your adhesive and edge banding machine to have the highest quality and performance. For the best mechanical properties, you should look for high-quality Henkel Technomelt Detergent. Unfortunately, the cleaning of the edge banding machine is sometimes overlooked, but the detergent should play a vital role in your daily operation-many people think its role is as important as the adhesive itself-a Good cleaners can play an important role and improve equipment efficiency.

"The right Henkel Technomelt cleaner will bring you many operational advantages, ensuring consistent dispensing and bonding quality, reducing downtime and maintenance, and extending the life of application equipment. Not to mention the peace of mind factor-nothing It is better to keep your equipment safe than knowing that the cleaning process has been completed, so your edge banding machine will be ready for the start of the next production run.

"While a good cleaning process is critical to all adhesives, it is particularly important for PUR adhesives to prevent the cross-linking and curing of the glue in the melting tank, pump, pipe, and piping system (including nozzles).

"Using Henkel Technomelt cleaners in the right way can reduce the time spent in the cleaning process, thereby saving hours of interruption and downtime during the entire life cycle of the edge banding machine, thereby increasing production time. Simplify the cleaning process and options The most suitable Henkel Technomelt adhesive is just as important.

"Through our high-quality partnership with Henkel, we can provide customers with guidance and help them choose the best Technomelt cleaners for their production lines. Our technical team is always available to help customers via phone calls or training days and on-site visits To ensure they make the most of adhesives and cleaners. This comprehensive support package is the basis for us to become a major supplier to many leading woodworking and building component manufacturers in the UK.

"Henkel's name is associated with very high-quality and market-leading technology. Of course, this applies not only to their adhesives, but also to their wide range of hot-melt cleaners, covering all aspects from surface cleaning to surface cleaning. . Thorough system/application equipment cleaning.

Considering that an effective cleaning process is important to complete on time, increase production, and achieve daily goals, we are here to help you get on the right path and make sure you make the most of every day.

High-performance surface cleaner. Very suitable for frequent cleaning of the machine surface. Effectively and easily remove any contaminants. Compared with the CLP classification of standard cleaners on the market, the main safety advantage. No solvent.

Remove residual, burnt adhesive and heavy grease and dirt. Clean glue guns, nozzles, bulk tanks and machine parts vigorously and carefully. Universal application on many materials. Easy to use. Fresh and pleasant smell. Environmental protection and safety based on natural raw materials.

Cleaner for all polyurethane hot melt adhesives in uncured state. Used with Technomelt PUR adhesive in daily operations. 1.2kg glue cylinder – Holz-Her edge banding machine and 1kg block glue machine

Cleaner for all polyurethane hot melt adhesives in uncured state. Use with Technomelt PUR adhesive in daily operations

Technomelt all-in-one cleaner

Polyurethane hot melt adhesive cleaning agent, specially used to remove uncured and cured polyurethane hot melt adhesive and carbonized hot melt adhesive residue. Provides deep cleansing. 1.4kg block for bulk glue machine

An all-in-one cleaner suitable for melting tanks, pumps, pipes and piping systems, and application units including nozzle applicators, specifically designed to remove uncured and cured polyurethane hot melt adhesives and carbonized hot melt adhesive residues

A cleaning agent for melting tanks, pumps, pipes and piping systems, and application units including nozzle applicators, specifically designed to remove uncured and cured polyurethane hot melt adhesives and cracked or burnt residues

Antistatic, release agent and cleaning agent are combined into one. Simplify the process and reduce costs and errors.

We believe that the above solutions are useful to you, so we provide a free on-site evaluation that will run through your entire edge banding process to solve any application problems including adhesive/cleaner selection and procedures. It is through this proven process that we have helped many companies that accept our recommendations become more efficient and realize what can be achieved.

Access the e-magazine, sign up for the newsletter

Read the article only for registered users

Registered magazine, print or digital version

Edit submission. Publish your work

Advertise with us, print or digital

Media pack, download media pack

Sign up for a free listing!

Upgrade your profile and add photos, videos, maps, social media links, PDF uploads and contacts

Designers and manufacturers: Publish your products to reach retailers around the world. Retailer? Sign up for the newsletter with the latest news, features and products.

© 2013-2021 Media 66 Ltd / Gearing Media Group Ltd / www.furnitureproduction.net / Furniture & Joinery Production / All rights reserved